Project Name：Dandenong government services office
Location：Dandenong  Australia
Glass Products：

6mm clear HS with ceramic frit on #2, double silver Low-E(SDS11-60D) on frit + 12mm air  + 8 mm clear HS
6mm clear HS with double silver Low-E(SDS11-60D) on frit + 12mm air  + 8 mm clear HS
6mm clear HS with ceramic frit on #2, double silver Low-E(SDS11-60D) on frit + 12mm air  + 10 mm clear HS
6mm clear HS with double silver Low-E(SDS11-60D) on frit + 12mm air  + 10 mm clear HS

The building harvests rainwater which is stored in a 40,000L tank for use in amenities flushing and landscaping irrigation. Fire testing water drains down into a 6,000L tank for reuse.
“It is noteworthy that we achieved Six Star Green Star without using black water harvesting or tri-generation. There was a lot of concentration on reduction of potable water use and energy efficiency,” said Grocon Project Manager,Andrew Poulton.
“There are waterless urinals, and all the fixtures and fittings are water efficient. Solar panels have been installed on the roof for the domestic hot water system, and we have used air cooled chillers for the airconditioning. The air conditioning is an under floor system of air diffusers, with individual controls for each seating position.
“The building has a BMS system and an EMS,with all the lighting controlled by sensors.VicUrban (now known as Places Victoria) are planning a central energy plant for the entire precinct, and we have made sure the GSO can connect to that.
“The facade is double glazed, with blinds and sun shading from the timber canopies. A frit pattern has been put on the glazing which acts both as a privacy screen for the work stations and as sun shading. This pattern was based on a survey undertaken by the architects, HASSELL in conjunction with Buro North the signage Consultant, of the local community and reflects
the symbols of the different cultural groups in the Dandenong community.”
The GSO also has 120 bicycle storage spaces including visitor bicycle parking, shower and change rooms to encourage carbon free commuting

Project Name：Westfields Sydney
Location：Sydney Australia
Glass Products：

12mm clear glass heat strengthened+1.95mm XIR (72-47)+6mm clear glass heat strengthened+2.28mm SGP film+6mm Planibel G heat strengthened.Low-e#6. Arrised and polished edges.

6mm clear glass tempered and heat soaked with ceramic frit pattern#2+1.95mm XIR (72-47)+6mm clear glass heat strengthened+2.28mm SGP film+6mm Planibel G heat strengthened.Low-e#6. Arrised and polished edges. Frit color:

19mm low-iron glass tempered and heat soaked+2.28mm SGP film+15mm low-iron glass tempered and heat soaked+2.28mm SGP film+19mm low-iron glass tempered and heat soaked. Arrised and polished edges.

Total Area：1000 m2

Project Name：Velex
Location：Japan
Products：Spider fittings; SS beam

Project Name：Toyota Head office in Australia
Location：Adelaide Australia
Glass Products：Laminated Double glazed unit with frit and Low-e Glass
Total Area：3000 m2

161 Castlereagh Street Podium/ Shopfront
Location: Sydney, Australia
• Laminated Low Iron Glass with Multi-Colored Ceramic Frit
• Laminated Low Iron Glass with Translucent PVB

161 Castlereagh Street (ANZ Tower) is an amalgamation of several sites, with frontages on to both Castlereagh and Pitt Streets. The office tower of 43 levels, designed by FJMT as the winner of an international design competition. ANZ and Freehills are the major corporate tenants.

We began work on the 161 Castlereagh St project in central Sydney in April 2010 and completed it in 2013.

Project Name：Digital Habour
Location：Adelaide Australia
Glass Products：13.52mm Super grey lam.24mm Supergrey DGU
Total Area：4000 m2

Project Name：Yokogawa Denki
Location：Tokyo, Japan
Glass Products：

6mm Sunergy clear H/S+9mm Air+10mm clear H/S

6mm Sunergy clear H/S+12mm Air+10mm clear H/S

6mm Sunergy clear annealed+9mm Air+10mm clear H/S

Total Area：1000 m2

Project Name：Tokyo Mid Town
Location：Tokyo, Japan
Glass Products：15&19&22&mm clear annealed+0.76mm clear PVB+15&22mm clear annealed
25mm clear annealed These glass are almost all oversized panels, Max. Height is 7694mm
Total Area：10000 m2

Glass:

Custom manufactured, Light Blush coloured, Low-E Insulating Glass with complimentary glass bends.

Architectural Requirement:

A warm subtle light blush external glass colour was chosen to compliment other external finishes for this avant-garde design in the Melbourne, trendy, beachside suburb of St Kilda. The glass also met ESD requirements and has low indoor neutral coloured reflectance as a consideration for night time conditions. Of course the glass met the onerous commercial requirements of a speculative development, was delivered ahead of time and on budget.

Location: Melbourne, Australia

• 6mm Grey + 9mm Air + 8mm Clear DGU
• 6mm Grey + 9mm Air + 8.38 Clear DGU
• Approx QTY: 9000SQM